James Bedford & Co (Dewsbury) Ltd. 61 Series StrongBox

61 Series Van StrongBox
Welded construction in 1.5mm thick steel sheet with flat steel hinged lid secured by single mortice lock. The box is fitted with weld on lifting handles and pre-punched for bolting to the floor or wall as required.

Sizes

Code Length x Width x Height

61945V 920 x 480 x 540

61 Series StrongBox
Welded construction in 2mm thick steel plate with step down lid secured by a pair of 5 lever mortice locks. The box lid is fitted with front lifting handle and safety stay. The units have weld on handles and is mounted on floor skids. The unit is supplied empty.

Sizes

Code Length x Width x Height

61166S 1000 x 650 x 650

61 Series StrongStor
Welded construction in 2mm thick steel plate incorporating hinged lid assembly supported by gas struts with safety stay and secured by a pair of 5 lever mortice locks. The store is mounted on floor skids, fitted with weld on side mounted handles and 2 heavy jib lifting points. The store is supplied empty, however fitted with side mounted angle brackets for a lift out shelf if required.

Sizes

Code Length x Width x Height

61161S 1000 x 650 x 1100

61 Series FireBox
Constructed as 61166S Site StrongBox with the addition of side mountedventilators with flash arrest mesh infill and a bottom mounted drain outlet with brass flanged plug. The base of the fire safe incorporates lift out raised platforms to allow for spillage. Supplied with suitable warning lables to the appropriate British standard

Workbenches & industrial furniture from James Bedford & Co. Ltd.